Important Product Information at Bottom of Page
(not including freight)
Freight is not included in the price and will be calculated on an individual basis. Includes 3 days of training at the Wixom Corporate Training Center in Michigan. Installation is easy and can be completed by the purchaser. If installation is requested an additional $1,500 plus expenses will be charged. 2 year limited warranty on the mill and 1 year on the spindle.
The Versamill 5X-400 based digital dental manufacturing system supports the manufacturing of multiple copings, crowns, bridges, inlays/onlays, abutments, dental bars and implant bridges.
- 5-Axis dental milling center capable of 5-Axis simultaneous machining including undercuts.
* Not recommended for continuous-duty machining of titanium abutments
|Travel Limits (X,Y & Z Axis)||145mm X-Axis, 110mm Y-Axis, 85mm Z-Axis|
|Travel Limits (A & B Axis)||± 180 Degrees A-Axis, ± 30 Degrees B-Axis|
|Maximum Feedrate (X,Y & Z Axis)||6,000 mm/min|
|Maximum Feedrate (A & B Axis)||30 RPM|
|Spindle||80,000 RPM 0.5kW Air Cooled|
|Automatic Tool Changer||10 Tools w/Tool Breakage Sensor|
|Rectangular Material Block||100mm X 100mm X 28mm|
|Circular Material Block||98.3Ø Disc|
|Machine Dimensions||545mm (W) X 590mm (L) X 680mm (H)|
|Installation Space||1220mm (W) X 900mm (L) X 2030mm (H)|
|Coolant Cabinet Dimensions||545mm (W) X 590mm (L) X 950 (H)|
|Drive Mechanism||Ball Screw|
|Way System||Linear Guide|
|Power||100-240 VAC 50/60 Hz Single Phase, 5.5 amps|
|Clamp Diameter/Tool Shank||4.0mm|
The most popular of the Versamill series. The powerful and fully-featured Versamill 5X400 Milling Center is a 5-Axis, purpose-built production wet dental mill that upgrades the capability of the Versamill 5X-300D by providing the additional strength, rigidity and power to enable it to process an even wider range of hard and soft dental materials.
The Versamill 5X400 is designed as an open source mill, designed to provide owners with maximum flexibility and versatility in a dental manufacturing system. The 5X400 can accept input from any dental design program and work with a wide variety of dental milling materials including; wax, zirconia, PMMA, glass-ceramics such as e.max and CELTRA® DUO, PEEK, Pekkton, nano-composits and more - even titanium abutments from pre-mill blanks.
The strength and rigidity of the Versamill 5X400 coupled with wet-milling and the undercut machining capability of full 5-Axis control provides superior surface finishes, faster cycle times and greater tool life while allowing you to machine an even wider variety of materials with the minimum amount of bench time.
Installation, training, service, repair and warranty provided by, Axsys Dental Solutions, Inc.
One year after purchase Axsys will contact its customers and offer a PersonalCARE Support Programs. The Gold package is $2,500 a year. Click here to review the PersonalCARE datasheet.