Guest
Cart

 

 

Blazing Fast Post-Processing

Important Product Information at Bottom of Page

Form 4B Post Processing

 SizePart #PriceQty.
Picture of Form Wash (2nd Generation), 120v – Automatically delivers hands-free, precision cleaning with IPA or alternative solvents. Load parts into the included basket – an impeller agitates solvent to reach every detail. When the wash cycle ends, parts automatically lift out to air dry, perfectly clean and ready for post-curing. option for Form 4B Post Processing  product (BlueSkyBio.com)
Form Wash (2nd Generation), 120v – Automatically delivers hands-free, precision cleaning with IPA or alternative solvents. Load parts into the included basket – an impeller agitates solvent to reach every detail. When the wash cycle ends, parts automatically lift out to air dry, perfectly clean and ready for post-curing.
Picture of Form Wash (2nd Generation), 120v – Automatically delivers hands-free, precision cleaning with IPA or alternative solvents. Load parts into the included basket – an impeller agitates solvent to reach every detail. When the wash cycle ends, parts automatically lift out to air dry, perfectly clean and ready for post-curing. option for Form 4B Post Processing  product (BlueSkyBio.com)
FH-WA-02$699.00
Picture of Form Cure (2nd Generation), 120v - delivers ultra-fast, precision post-curing with 4× more UV power, 5× faster heat-up, and a 1.3× larger chamber. Cure Form 4/B prints in as little as 60 seconds using preset settings validated for 45+ Formlabs materials—or customize time and temperature for your workflow.
This final step boosts strength, toughness, heat resistance, and surface quality. Essential for biocompatible materials to meet regulatory standards.

Coming Soon!
 option for Form 4B Post Processing  product (BlueSkyBio.com)
Form Cure (2nd Generation), 120v - delivers ultra-fast, precision post-curing with 4× more UV power, 5× faster heat-up, and a 1.3× larger chamber. Cure Form 4/B prints in as little as 60 seconds using preset settings validated for 45+ Formlabs materials—or customize time and temperature for your workflow. This final step boosts strength, toughness, heat resistance, and surface quality. Essential for biocompatible materials to meet regulatory standards.
Coming Soon!
Picture of Form Cure (2nd Generation), 120v - delivers ultra-fast, precision post-curing with 4× more UV power, 5× faster heat-up, and a 1.3× larger chamber. Cure Form 4/B prints in as little as 60 seconds using preset settings validated for 45+ Formlabs materials—or customize time and temperature for your workflow.
This final step boosts strength, toughness, heat resistance, and surface quality. Essential for biocompatible materials to meet regulatory standards.

Coming Soon!
 option for Form 4B Post Processing  product (BlueSkyBio.com)
FH-CU-120V-02$999.00
 
ADD TO CART

Form 4B Accessories

 SizePart #PriceQty.
Picture of Resin Tank (Form 4B) option for Form 4B Accessories product (BlueSkyBio.com)
Resin Tank (Form 4B)
Picture of Resin Tank (Form 4B) option for Form 4B Accessories product (BlueSkyBio.com)
RT-F4-01$99.00
Picture of Mixer (Form 4B)  option for Form 4B Accessories product (BlueSkyBio.com)
Mixer (Form 4B)
Picture of Mixer (Form 4B)  option for Form 4B Accessories product (BlueSkyBio.com)
MXR-F4-01$25.00
Picture of Build Platform (Form 4B) option for Form 4B Accessories product (BlueSkyBio.com)
Build Platform (Form 4B)
Picture of Build Platform (Form 4B) option for Form 4B Accessories product (BlueSkyBio.com)
BP-F4-01$119.00
Picture of Flex Build Platform (Form 4B) option for Form 4B Accessories product (BlueSkyBio.com)
Flex Build Platform (Form 4B)
Picture of Flex Build Platform (Form 4B) option for Form 4B Accessories product (BlueSkyBio.com)
BP-F4-02$249.00
Picture of Finishing Kit (Form 4B) Includes: two rinse buckets, rinse basket, removal tool, plastic tank scraper, build platform jig, flush cutters, squeeze bottle, and disposable nitrile gloves. option for Form 4B Accessories product (BlueSkyBio.com)
Finishing Kit (Form 4B) Includes: two rinse buckets, rinse basket, removal tool, plastic tank scraper, build platform jig, flush cutters, squeeze bottle, and disposable nitrile gloves.
Picture of Finishing Kit (Form 4B) Includes: two rinse buckets, rinse basket, removal tool, plastic tank scraper, build platform jig, flush cutters, squeeze bottle, and disposable nitrile gloves. option for Form 4B Accessories product (BlueSkyBio.com)
FK-F4-01$99.00
Picture of Resin Pump (Form 4B) - Delivers 5L of resin through a pumping system directly to the 4B printer's resin tank.  option for Form 4B Accessories product (BlueSkyBio.com)
Resin Pump (Form 4B) - Delivers 5L of resin through a pumping system directly to the 4B printer's resin tank.
Picture of Resin Pump (Form 4B) - Delivers 5L of resin through a pumping system directly to the 4B printer's resin tank.  option for Form 4B Accessories product (BlueSkyBio.com)
F4-RPS-01$349.00
Picture of Resin Pump Maintenance Kit (Form 4B)
Replacement tubing for the Resin Pumping System.  Tubing must be replaced every six months to maintain resin pump performance or any time there is a change to a different resin type. 
This kit includes the internal pump tubing and transfer tubing needed for the replacement. option for Form 4B Accessories product (BlueSkyBio.com)
Resin Pump Maintenance Kit (Form 4B)
Replacement tubing for the Resin Pumping System. Tubing must be replaced every six months to maintain resin pump performance or any time there is a change to a different resin type.
This kit includes the internal pump tubing and transfer tubing needed for the replacement.
Picture of Resin Pump Maintenance Kit (Form 4B)
Replacement tubing for the Resin Pumping System.  Tubing must be replaced every six months to maintain resin pump performance or any time there is a change to a different resin type. 
This kit includes the internal pump tubing and transfer tubing needed for the replacement. option for Form 4B Accessories product (BlueSkyBio.com)
RP-RPS-MKIT$39.00
Picture of Formlabs Resin Washing Solution 5L - A non-flammable solution for cleaning resin off of 3D printed parts. Recommended with the Form Wash (2nd Generation) option for Form 4B Accessories product (BlueSkyBio.com)
Formlabs Resin Washing Solution 5L - A non-flammable solution for cleaning resin off of 3D printed parts. Recommended with the Form Wash (2nd Generation)
Picture of Formlabs Resin Washing Solution 5L - A non-flammable solution for cleaning resin off of 3D printed parts. Recommended with the Form Wash (2nd Generation) option for Form 4B Accessories product (BlueSkyBio.com)
SLN-RW-01$75.00
Picture of Solvent Pump (Form 4B) - A battery powered pump that quickly fills and empties a wash bucket for Form Wash.  Eliminates the risk of chemical spills. option for Form 4B Accessories product (BlueSkyBio.com)
Solvent Pump (Form 4B) - A battery powered pump that quickly fills and empties a wash bucket for Form Wash. Eliminates the risk of chemical spills.
Picture of Solvent Pump (Form 4B) - A battery powered pump that quickly fills and empties a wash bucket for Form Wash.  Eliminates the risk of chemical spills. option for Form 4B Accessories product (BlueSkyBio.com)
FH-WA-SP-01$60.00
 
ADD TO CART

 

Form Wash – 2nd Generation

The Form Wash 2nd Generation automates post-print cleaning to deliver consistent, hands-free results for dental 3D printed parts. With improved agitation, adjustable platform mounts, and flexible solvent usage, it streamlines your workflow while maintaining clinical-level cleanliness and precision. Compared to the previous generation, it washes up to 67% more parts per isopropyl alcohol (IPA) fill, helping you reduce downtime and maximize productivity in your lab or practice.

Engineered for dental professionals, Form Wash features a set-it-and-forget-it design with automatic timing, material-based presets, and seamless platform compatibility.  Whether you're cleaning small batches of surgical guides or full-arch models, Form Wash adapts to your needs and helps standardize your workflow from printer to post-processing.

Key Features
•    Cleans most parts in just 10 minutes using fresh isopropyl alcohol (IPA)
•    3× more agitation for a faster, more thorough clean
•    Adjustable build platform mounts fit various printer platforms
•    Uses 1.8–4 gallons (7–15 liters) of solvent based on part volume
•    Supports up to 120 prints per IPA refill with regular use
•    Compatible with IPA, TPM, and other approved cleaning solvents

Form Wash 2nd Gen is the ideal solution for practices and labs that demand speed, consistency, and cleaner results with minimal manual effort.

 

Form Wash (2nd Generation) - Tech Specs

Printer Compatibility Form 4, Form 4B, Form 3/+, Form 3B/+,
Form 2
Dimensions

12.4 x 11.5 x 15.9 in  (31.5 x 29.3 x 40.5 cm)

Height when open: 28.1 in  (71.4 cm)

Weight 18.9 lbs (8.6 kg) *without solvent
Bucket Volume 3.8 US gal  (14.4 L)
Maximum Part Size 7.9 x 5.7 x 7.6in  (20 x 14.5 x 19.5cm)
Suggested Operating Environment Suggested 64—82°F  (Suggested 18—28°C)
Agitation Method Magnetically coupled impeller
Included Accessories

a. Wash Bucket
b. Wash Basket
c. Hydrometer
d. 2x Platforms Mounts

Power Requirements 90–240 V
2.0 A 50/60 Hz
50 W
Compatible Solvents Formlabs Resin Washing Solution, Isopropyl Acohol (IPA), TPM, Water

 

 

Form Cure – 2nd Generation

Designed for speed, efficiency, and reliability, the Form Cure 2nd Generation is a blazing fast and advanced post-curing solution for dental 3D printing.  Cure any dental part, including biocompatible appliances, in less than 10 minutes with validated, pre-programmed settings and near-instant heat-up.  Compared to the previous generation, it reduces post-cure time for Dental LT Clear V2 by up to 50 minutes, helping you deliver final parts faster without compromising quality.
With uniform light distribution and precision heating up to 212 °F, Form Cure 2nd Gen ensures consistent, high-quality results for every indication. The redesigned system features a side-opening door, easy-to-clean glass turntable, and a compact footprint with generous internal clearance for effortless use in any lab setting.

Key Features
•    Cures dental models in as little as 60 seconds
•    Heats to 140 °F in 60 seconds and 176 °F in 150 seconds
•    Holds up to 15 models at once on a 9.25-inch rotating turntable
•    Validated settings for all dental and biocompatible resins
•    Supports continuous use with multiple Form 4B printers for maximum throughput

Form Cure 2nd Gen is the ideal solution for dental labs and practices looking to scale up production without adding complexity to their workflow.

 

Form Cure (2nd Generation) - Tech Specs

Printer Compatibility Form 4, Form 4B, Form 3/+, Form 3B/+, Form 2
Dimensions

13.3 × 14.0 × 15.9 in  (33.7 × 40.4 × 37.2 cm)

Height when open: 28.1 in  (71.4 cm)

Weight 26.7 lb (12.1 kg)
Turntable Diameter 9.25 in  (23.5 cm)
Maximum Part Size 9.64 in  (24.5 cm)
Maximum Cure Chamber Temperature 212 °F  (100 °C)
Light Source 48 multi-directional LEDs
LED Power

150 W

LED Radiant 50 W
LED Wavelength 405 nm
Power Requirements Input (NA) 100 - 120 V
VAC, 50-60 Hz, 15 A

 

Downloads
Download Form 4B Dental Ecosytem at a Glance Brochure
Download Form Wash 2nd Generation Manual
Download Form Cure 2nd Generation Manual